車庫門是企業的常用設施，適用于商業門面等，常見的車庫門主要有遙控、電動、手動幾種。其中遙控、感應、電動都可統稱為自動車庫門。手動車庫門和自動車庫門主要區別是沒有電機。 自動車庫門現在主要分類為：翻板車庫門與卷簾車庫門。尤其是門洞較大，不便安裝地面門體的地方起到方便、快捷開啟作用。

Garage door is a common facility of enterprises, which is suitable for commercial facade. Common garage doors mainly include remote control, electric and manual. Among them, remote control, induction and electric can be collectively referred to as automatic garage door. The main difference between manual garage door and automatic garage door is that there is no motor. Automatic garage doors are now mainly classified into: flap garage doors and rolling shutter garage doors. Especially where the door opening is large and it is inconvenient to install the ground door body, it plays a convenient and fast opening role.

ge door, glass induction door, etc. The company has stable raw material suppliers and sufficient supply of goods

1、車庫門：車庫門主要有遙控、感應、電動、手動幾種。 其中遙控、感應、電動都可統稱為自動車庫門。 自動車庫門主要分類為：翻板車庫門與卷簾車庫門。尤其是門洞較大，不便安裝地面門體的地方起到方便、快捷開啟作用。

1. Garage door: garage door mainly includes remote control, induction, electric and manual. Among them, remote control, induction and electric can be collectively referred to as automatic garage door. Automatic garage doors are mainly classified into: flap garage door and rolling shutter garage door. Especially where the door opening is large and it is inconvenient to install the ground door body, it plays a convenient and fast opening role.

2、卷簾車庫門則有：普通卷簾車庫門、不銹鋼卷簾車庫門、鋁合金卷簾車庫門、發泡卷簾門、無機布防火卷簾門等等。市面上非常常見的卷簾車庫門為鋁合金擠壓型材制作而成，表面經過靜電粉末噴涂、氟碳噴涂等處理工藝，達到抗腐蝕、耐酸堿、不生銹、抗劃傷等特性，耐久性強，使用壽命較長，強度大，具有防盜、防護等性能，因此運用廣泛。

2. Rolling shutter garage doors include: ordinary rolling shutter garage door, stainless steel rolling shutter garage door, aluminum alloy rolling shutter garage door, foam rolling shutter door, inorganic cloth fireproof rolling shutter door, etc. The very common rolling shutter garage door on the market is made of aluminum alloy extruded profiles. The surface is treated by electrostatic powder spraying, fluorocarbon spraying and other treatment processes to achieve the characteristics of corrosion resistance, acid and alkali resistance, rust resistance and scratch resistance. It has strong durability, long service life, high strength, anti-theft, protection and other properties, so it is widely used.

3、翻板車庫門有：彩鋼板車門車庫門、羅普斯金車庫門、木紋門車庫門、實木車庫門4、感應車庫門：車庫門可以安裝防盜、系統，如降遇阻力反統，該設施能讓門體遇阻力停止，既保護人身與車輛進出，又保護門的可靠使用；紅外線傳感器控制系統，保障人、車輛、寵物的進出；防盜報警系統，當有人撬門時高音喇叭將發出警報，保護。 同時設有停電備用電池工作功能，停電后無需手動開門。下面就幾種常用車庫門類型做具體介紹：

3. Flap garage doors include: color steel plate garage door, ropskin garage door, wood grain garage door, solid wood garage door 4. Induction garage door: the garage door can be equipped with anti-theft system. In case of resistance reduction, the facility can stop the door in case of resistance, which can not only protect the entry and exit of people and vehicles, but also protect the reliable use of the door; Infrared sensor control system to ensure the access of people, vehicles and pets; Anti theft alarm system, when someone pries the door, the tweeter will give an alarm to protect. At the same time, it has the function of power-off standby battery, and there is no need to open the door manually after power-off. Several common garage door types are introduced in detail below:

有關電動車庫門的安裝，可能很多的人都不會，而且也不會對它進行更優越的保護，高品質青島手動車庫門安裝維修,車庫卷簾門相關，如果你們知道它的安裝程序，那么你也就會更好的來保養它。車庫門在生活中使用非常廣泛，大部分都是自動車庫門,或者遙控車庫門。

As for the installation of electric garage door, many people may not, and will not give it better protection. The installation and maintenance of high-quality Qingdao manual garage door is related to garage roller shutter door. If you know its installation procedure, you will better maintain it. Garage doors are widely used in life. Most of them are automatic garage doors or remote garage doors.

一、軌道的安裝

1、 Installation of track

根據門板的寬度和高度確定兩軌道固定性的位置并用水平管測水平，再用M8×41㎜的方頭螺釘固定。用卷尺測準水平軌與墻壁及兩水平軌之間的間距，用水平尺測準水平軌的水平，然后用M6.4×14㎜的小帽螺絲和六角螺帽將水平軌連接件與水平軌和軌道固定性連接固定。用帶眼角鋼制成兩個三角架，然后將其與水平軌的末端用M6.4×14㎜的小帽螺絲、螺帽連接，并用M8×70㎜的膨脹螺栓固定到天棚或墻壁上。

Determine the fixed position of the two rails according to the width and height of the door panel, measure the level with a horizontal pipe, and then use M8 × Fix with 41 mm square head screw. Use a tape to measure the distance between the horizontal rail and the wall and the two horizontal rails, use a level ruler to measure the level of the horizontal rail, and then use M6 four × 14 mm small cap screws and hexagon nuts fixedly connect the horizontal rail connector with the horizontal rail and the rail. Make two tripods from angle steel with eyes and connect them with the end of the horizontal rail with M6 four × 14 mm small cap screws and nuts shall be connected with M8 × 70mm expansion bolts are fixed to the ceiling or wall.

二、扭簧的安裝

2、 Installation of torsion spring

將扭簧支架、尼龍膠圈、固定法蘭、與門體重量相匹配的扭簧、鎖緊法蘭、繞線輪、軸承支架按順序（分清左右側）套在鍍鋅鋼管上，并注意各零部件是否安裝正確。用M8×41㎜的方頭螺釘將扭簧支架固定到洞口上部中間位置的短木板上，并注意避開鏈盒的安裝位置。用M8×40㎜的螺栓將扭簧支架、尼龍膠圈、固定法蘭和扭簧連接，再將扭簧和鎖緊法蘭連接。然后將軸承支架的下端用M9.5×19㎜的大帽螺絲和螺帽與水平軌連接件連接固定，軸承支架的上端用M8×41㎜的方頭螺釘固定到側木框上。

Put the torsion spring support, nylon rubber ring, fixed flange, torsion spring matching the weight of the door body, locking flange, winding wheel and bearing support on the galvanized steel pipe in sequence (distinguish the left and right sides), and pay attention to whether all parts are installed correctly. Use M8 × Fix the torsion spring support to the short wooden board in the middle of the upper part of the hole with a square head screw of 41mm, and pay attention to avoid the installation position of the chain box. Use M8 × Connect the torsion spring support, nylon rubber ring, fixed flange and torsion spring with 40mm bolts, and then connect the torsion spring and locking flange. Then screw the lower end of the bearing support with M9 five × 19 mm large cap screws and nuts are connected and fixed with the horizontal rail connector, and the upper end of the bearing support is M8 × Fix the 41mm square head screw to the side wooden frame.

三、門板的安裝

3、 Installation of door panel

將底密封條放到底門板的底部，并用M4×16㎜或M6.4×16㎜的自攻釘將其從背面固定到門板上。將底輪支架放到門板的兩側近底密封條的位置，青島手動車庫門安裝維修,玻璃門，1#折頁分別放到門板頂部的左中右三個位置上（寬度低于10英尺，中間位置是一個；寬度在10英尺至14英尺，中間位置是二個；寬度在15英尺至18英尺，中間位置是三個），并分別用M6.4×16㎜的自攻釘固定。然后將滾輪涂上穿入底輪支架和1#折頁中，山東遠騰建筑工程有限公司,遠騰建筑工程,將此門板放到立好的軌道里并使其水平。將2#折頁、3#折頁、4#折頁、頂輪支架按順序分別固定到各塊門板頂部的左右位置，各塊門板中間位置的連接采用1#折頁。將各塊門板按順序放到已立好的軌道里，用M6.4×16㎜的自攻釘連接各折頁與各門板，使各塊門板組合成一體。

Place the bottom sealing strip on the bottom of the door panel and use M4 × 16mm or M6 four × 16 mm self tapping screws fix it to the door panel from the back. Place the bottom wheel bracket at the position near the bottom sealing strip on both sides of the door panel, install and repair the Qingdao manual garage door, and place the glass door and 1# hinge at the left, middle and right positions on the top of the door panel respectively (the width is less than 10 feet, one in the middle position; the width is 10 feet to 14 feet, two in the middle position; the width is 15 feet to 18 feet, three in the middle position), and use M6 four × Fix with 16mm self tapping screw. Then apply the roller and thread it into the bottom wheel support and 1# hinge. Shandong yuanteng Construction Engineering Co., Ltd., yuanteng construction engineering, put the door panel into the erected track and make it horizontal. Fix the 2# hinge, 3# hinge, 4# hinge and top wheel support to the left and right positions of the top of each door panel in sequence, and the connection in the middle of each door panel adopts 1# hinge. Put each door panel into the erected track in order and use M6 four × 16 mm self tapping screws are used to connect each hinge and each door panel to make each door panel integrated.

四、扭簧的上勁

4、 Torque of torsion spring

將鋼絲繩帶環的一端套在底輪支架的鉤軸上。按照規定的上勁表給扭簧上勁，不要超過或低于規定圈數的半圈，別住鋼棍，將鋼絲繩的另一端掛在繞線輪上，繃緊鋼絲繩，鎖住繞線輪，再鎖住鎖緊法蘭，撤下別住的鋼棍。此過程具有很大的危險性，需要注意，既要保護好自己，又要避免傷及他人。

Put one end of the steel wire rope belt ring on the hook shaft of the bottom wheel support. Tighten the torsion spring according to the specified tightening table, not more than or less than half a circle of the specified number of turns, fasten the steel rod, hang the other end of the steel wire rope on the winding wheel, tighten the steel wire rope, lock the winding wheel, lock the locking flange, and remove the fastened steel rod. This process is very dangerous and needs attention. We should not only protect ourselves, but also avoid hurting others.

五、調整

5、 Adjust

用手將門升降數次，觀察門體運行是否平穩，青島手動車庫門安裝維修,電動玻璃門安裝維修，扭簧的力量是否適當，然后做具體調整并緊固各連接部分的螺絲。

Lift the door several times by hand, observe whether the door body operates stably, whether the installation and maintenance of Qingdao manual garage door, the installation and maintenance of electric glass door, and whether the force of torsion spring is appropriate, and then make specific adjustments and tighten the screws of each connecting part.

六、電機的安裝

6、 Installation of motor

將鏈盒與電機連接并固定。將鏈盒前端的U形架固定到扭簧支架上面的木板上并居中，連接鏈盒。用帶眼角鋼做成“∏”支架，下端與電機用M8連接固定，上端用兩個M8×70㎜的膨脹螺栓固定到天棚上。用M6.4×16㎜的自攻釘將鉤座固定到頂門板頂部的中間位置上，連接鉤子。接上電源，觀察電機的運行情況，調整上下行程。

Connect and fix the chain box with the motor. Fix the U-shaped frame at the front end of the chain box to the wood plate above the torsion spring support and center it to connect the chain box. The "Π" bracket is made of angle steel with eyes, the lower end is connected and fixed with the motor with M8, and the upper end is connected with two M8 × 70mm expansion bolts are fixed to the ceiling. Use M6 four × Fix the hook seat to the middle of the top of the top door plate with 16mm self tapping screw, and connect the hook. Connect the power supply, observe the operation of the motor and adjust the up and down stroke.

七、布線

7、 Wiring

用Φ1.0線徑的白色護套線，從電機尾部的電動開關接線端子中引出，順著電機吊架布到洞口左側距地面1.2 M處，每隔500㎜釘一個線卡子，然后接上手動開關。布線要橫平豎直，既美觀又合理。

use Φ The white sheathed wire with 1.0 wire diameter is led out from the electric switch terminal at the tail of the motor, laid along the motor hanger to the left side of the hole 1.2 m away from the ground, nailed with a wire clip every 500 mm, and then connected to the manual switch. The wiring shall be horizontal and vertical, beautiful and reasonable.

八、提手的安裝

8、 Installation of handle

提手應安裝在底門板上，左右居中，橫向線與方格的下端邊緣線對齊。

The handle shall be installed on the bottom door panel, centered left and right, and the transverse line shall be aligned with the lower edge line of the grid.

九、鎖的安裝鎖眼要用專門的開孔器，開在從下往上數的第三塊門板的位置，安裝時鎖槽一律向下，背帽一定要擰緊。

9、 The installation keyhole of the lock shall use a special hole opener, which shall be opened at the third door plate from bottom to top. During installation, the lock slot shall be downward, and the back cap must be tightened.

本文由濟南車庫門為您提供，我們的網站是：http://www.thepartymansion.com濟南車庫門我們將以全心全意的熱情為您提供服務，歡迎您的訪問

This article is provided by Jinan garage door. Our website is: ：http://www.thepartymansion.comJinan garage door. We will provide services for you with wholehearted enthusiasm. Welcome to visit!